MRCrypt Revival 

QUICK HELP

Install:
-------
1/-Select ZIP file
2/-Right Clic in file & Select "Extract to MRCrypt..."
3/-Create ShortCut in Desktop
4/-Double clic on ShortCut to start application


Default MRCrypt Revival(MR) Directories 
---------------------------------------
- MR BIN-UPD   -> Store BIN & UPD File
- MRThemes     -> Store Themes Application
- MRLanguages  -> Multi language file directory
- MRFlashFile  -> Flash For FUN2 to FUN6 & Flash For FUN7
                  Directory automatiquely created if not exist.
- MRFuncard    -> EEprom for Fun2,Fun3,Fun4,Fun5,Fun6,Fun7
                  Directory automatiquely created if not exist.
- MRFileKeys   -> MR_KEYS.TXT, IDENTS_LIST.TXT, MR_KEYS to SOFTCAM.KEY, SOFTCAM.KEY to MR_KEYS,
                  UPDATED_KEYS.TXT.
                  Directory automatiquely created if not exist. 
                  Clic on "Open MRFileKeys" in MRCrypt Revival to open direcrory.
- MRDatas      -> Idents Table
- MRTables     -> Matrix Reloaded & Matrix Revolution Table
- MRSettings   -> Com Port Settings stored in serial.ini file
                  (Com Port Autodetection, Port selected, Baud Rate)



LOAD FILE
---------
1-Run MRCrypt
2-Open MR\MRV Firmware
3-Clic on "Expand" button to view all ident in "System Crypt/Idents"
or
Use DROP file function 
1/-Open your BIN folder
2/-Run MRCrypt
3/-Select file with mouse and dropt it main window
Now file is opened by MRCrypt Revival


SAVE FILE
---------
1-Run MRCrypt
2-Open MR\MRV Firmware
3-Make your changes
4-Clic on "Save" button -> BIN file saved & UPD file automatiquely created


SAVE AS
-------
How to SAVE BIN & Create UPD in same time
1-Run MRCrypt
2-Open MR\MRV Firmware
3-Make your changes
4-Clic on "Save As"
5-Enter a name or use default name selected
BIN File saved & UPD file created too  
Default folder is MR BIN-UPD but you can select another one
Destination directory open automatiquely after file writing.


EDIT,MODIFY IDENT KEYS
----------------------
1-Run MRCrypt
2-Open MR\MRV Firmware
3-Clic on "Expand" button to view all ident in "System Crypt/Idents"
4-Select an Ident to see keys
5-Make changes (Edit,Modify,Paste...)


CLEAR IDENT KEYS
----------------
1-Run MRCrypt
2-Open MR\MRV Firmware
3-Clic on "Expand" button to view all ident in "System Crypt/Idents"
4-Select an Ident to see keys
5-Clic on "Clear Current Keys"
  All keys will be to zero.


EXPORT FIRMWARE KEYS 
--------------------
1-Run MRCrypt
2-Open MR\MRV Firmware
3-Clic on "Create MR_KEYS File & Idents_List File"
4-All keys will be saved in directory MRFilekeys, 
  this directory will be open automatiquely after file creation.
  File created: MR_KEYS.TXT & IDENTS_LIST.TXT


IMPORT KEYS
-----------
1-Run MRCrypt
2-Open MR\MRV Firmware
3-Clic on "Import Keys"
4-Select type of import file
  - Softcam file
  - MR_KEYS (or DRA_KEYS or FUN_KEYS compatible file format: file produce by DragonCRypt & FunkeyEdit)
  - Fun6in1
5-Load file
6-Expand Selected Keys: 
  Clic on "Expand All" to view all idents or double clic on System Crypt to open ident
  Clic on "Select All" to select all keys in one pass or make individual selection (doucle clic on Ident)
  Compare keys: select same idem in Import Keys windows and MR KEYS Windows
                keys appears in Keys list 
7-Clic on "Update Keys" to update new keys in Matrix firmware.
New Keys detected by import function added in File KEYS_UPDATED.TXT
File created automatiquely during update.


EDIT MR_KEYS FILE
-----------------
1-Run MRCrypt
2-Open MR\MRV Firmware
3-Clic on "Edit/Convert MR KEYS File"
4-Load MR_KEYS.TXT
5-Edit,Modify or Convert to SOFTCAM keys file
6-Clic on "Save"
Destination directory will be open automatiquely after file creation.


EDIT SOFTCAM.KEY FILE
---------------------
1-Run MRCrypt
2-Clic on "Edit/Convert MR KEYS File"
3-Load SoftCam.Key
4-Edit,Modify or Convert to MR_KEYS file
5-Clic on "Save"
Destination directory will be open automatiquely after file creation.


EDIT IDENT TABLE
----------------
1-Run MRCrypt
2-Open MR\MRV Firmware
3-Clic on "Edit Ident File"
4-Load INI file
5-ADD/DELETE/MODIFY/MOVE ident
6-Clic on "Save"
Treeview "System Crypt/Idents" will be updated with new ident and all file will be produce too.


REPLACE IDENT
-------------
1-Run MRCrypt
2-Open MR\MRV Firmware
3-Select System Crypt in treeview (Nagravision,Seca,Viaccess,Irdeto,Conax)
4-Select Ident
5-Clic on Ident Combo Box and select new ident
  Treeview & windows keys will be updated with new ident & new name


MOVE,CLEAR IDENT(S)
-------------------
1-Run MRCrypt
2-Open MR\MRV Firmware
3-Clic on "Providers"
4-Select System Crypt (Nagravision,Seca,Viaccess)
5-UP Button: swap current ident with previous
  DOWN Button: swap current ident with next    
  CLEAR Button: current ident clear to EMPTY and keys to 0
  CLEAR ALL KEYS button: all idents keys in selected list to 0
  CLEAR ALL Button: all idents in windows clear to EMPTY and keys to 0  
  Use space bar for quick move:
      - Press space bar Select/Deselect ident
      - Select new ident (left clic)
      - Press space bar (ident swapped) 
6-clic on "Update" to validate changes


KEY CONVERTER
-------------
1-Clic on "Convert Key"
2-Tick "HEX to DEC" or "DEC to HEX"
3-Input Key


PRODUCE FLASH FILE
------------------
1-Run MRCrypt
2-Clic on button "Produce FUN Flash"
3-File created in directory MRFlashFile.
  Directory open automatiquely after creation files.
  Flash_For_Fun2_to_Fun6.hex
  Flash_For_Fun7.hex


MATRIX FILE CONVERTER
---------------------
BIN to UPD & UPD to BIN
1-Run MRCrypt
2-Clic on button "Matrix File Converter"
3-Load File (BIN or UPD)
4-Select Destination Directory
5-Clic on "Create" button


PRODUCE FUNCARD
---------------
1-Run MRCrypt
2-Clic on button "Produce Funcard"
3-Load UPD File
4-Select Destination Directory
5-Select Funcard Type (Fun2 to Fun7)
6-Clic on "Create" button


SERIAL LOADER
-------------
1-Run MRCrypt
2-Clic on button "Matrix Serial Loader Programming"
3-Load UPD File
4-Select COM Port (ticks autodetect Com Port to see all port available in machine)
5-Select Baud Rate
6-In MENU select "SETUP->UPGRADE FIRMWARE" and Press OK in remote control
7-Wait message "Insert card 1 or serial dummy card" 
8-Insert Dummy Card and wait 10 secs
9-Select "Dummy card" in menu ci & Press ok.
10-Wait the message "Performing serial download" 
11-Clic on "Write" button to start programming
Setting saved when windows closed (\MRSettings\Serial.ini)


PHOENIX LOADER
--------------
1/-Run smartcard progger & select Funcard
2/-Load flash Fun7FlashLoader.hex & Burn only the flash
3/-Activate MODE PHOENIX 6.00 MHZ
4/-In MatrixPL select BIN file & Com Port & Funcard Type
5/-Press WRITE button. Wait downloading finish. Exit PHOENIX mode
6/-Load flash Flash_For_Fun2_to_Fun6.hex in flash for fun6
   Load flash Flash_For_Fun7.hex in flash for fun7
   Burn only the flash
Flash Fun7FlashLoader.hex in MRFlashFile Folder
 

LANGUAGES
---------
How to change language interface
1-Run MRCrypt
2-In main menu Select option "SETTINGS"
3-Select Sub Menu "Languages"
4-Select Language file
Now Selected file language is used by default in software


THEMES
------
How to change software appareance
1-Run MRCrypt
2-In main menu Select option "SETTINGS"
3-Select Sub Menu "Themes"
4-Select Theme file
Now Selected file Theme is used by default in software


(C) MASARE Team - Saoud007.